This Function shall be capable of providing the following facilities:<br/><br/>(1) The ability to collect information for output to Drivers, Cyclists and Pedestrians from some or all of other functionality in the Manage Traffic Functional Area, functionality in the Provide Advanced Driver Assistance Functional Area and input from the Multi-Modal Crossings Terminator.<br/>(2) The output of consistent and coherent information and/or commands to Drivers using the urban road network.<br/>(3) The ability for the outputs to be used to provide such things as, journey time information, commands for unexpected speed or lane use, weather condition and road surface warnings, etc.<br/>(4) The output of warning messages about the activity of a particular Vehicle will include its identity.<br/>(5) The ability to output data containing information and/or warning messages plus commands to other functionality for subsequent output to Vehicles as they pass by.<br/>(6) The ability of the outputs to make use of different display technologies, other than those in the Vehicle.<br/>(7) The monitoring of its operation and the reporting of any abnormalities to Maintenance Management functionality.<br/>(8) The reporting of a fault to the Maintenance Management facility if a Vehicle reports that what is being output by the Function is not the same as what is being received in the Vehicle.<br/>
(a) when the urban traffic management c&i request data flow is received from the Urban Traffic Control function, its contents shall be implemented;<br/>(b) the implementation required in (a) shall be achieved through the output of the data flows to drivers, cyclists and pedestrians;<br/>(c) the response to (b) shall be sent to the Urban Traffic Control function using the msg response data flow;<br/>(d) if the response from (b) is that the data flows have not been output, data shall be sent to the Maintenance Management functionality using the c&i equipment fault data flow, and a device failed indication in the urban device status and urban traffic management c&i response data flows;<br/>(e) when the incident warning messages or urban crossing information data flows are received, they shall be implemented as in (b) to (d) above;<br/>(f) when the urban c&i display error data flow is received, check its contents to see if a difference has been found;<br/>(g) if a difference has been found in (f) then send a device failed indication to the Evaluate Need for Equipment Maintenance function in the urban c&i equipment fault data flow and to the Implement Urban Traffic Commands function in the urban traffic management c&i response data flow;<br/>(h) when any of the roadside vehicle lane departure warning, other vehicle lane departure warning, possible conflicts with vehicle movement, traffic queue ahead warning and advice, slow objects warning and advice, stationary emergency vehicle ahead warning data flows are received, or output the data that it includes in the host vehicle driver warning messages data flow to the driver and if it is included with the data, output the identity of the vehicle to which the warning applies;<br/>(i) send the data in (h) to the Output Message Data to Following Vehicles function in the data for output to following vehicles data flow;<br/>(j) the content of all of the outputs shall be monitored and if necessary revised to ensure that they are consistent and coherent.<br/>