Overview

This Terminator shall represent external entities that provide data to the System from which its location can be determined.  Typically this data shall be provided continuously without requests being made by any of the receiving Functions within the System.  The data shall be used by these Functions in the determination of the position of Vehicles and Travellers within the road network managed by the System, e.g. when the location of a Public Transport vehicle is needed to determine if it requires priority at junctions controlled by the System.  The actual identity of the source of the data is not important, but it could for example be GPS, or in the future perhaps Galileo.

Diagrams

The Diagram(s) is(are) the Diagram(s) where you can find the Terminator

Context Diagram

Acronym

lds

Output logical dataflows

flds-car_pooler_location

flds-freight_vehicle_position_information

flds-hazardous_goods_vehicle_location

flds-location_data_for_bus_lane_use

flds-location_data_for_command_&_warning_outputs

flds-location_data_for_incident_warnings

flds-location_data_for_vehicle_sensor_data

flds-location_for_priority

flds-mffo_inputs

flds-monitor_PT_fleet_inputs

flds-mpto_inputs

flds-mpto_passenger_location

flds-mpto_traveller_location

flds-mpto_vehicle_position

flds-mt_inputs

flds-on-demand_service_vehicle_location

flds-pscs_inputs

flds-psef_location_data

flds-pshvs_inputs

flds-ptja_inputs

flds-ptja_location_for_information

flds-ptja_traveller_location

flds-vehicle_location_for_attitude

flds-vehicle_location_for_road_information

flds-vehicle_location_for_trip_monitoring

flds-vehicle_location_for_trip_planning

flds-vehicle_position_for_eCall

flds_vehicle_location_for_sensitive_area_access

From Location Data Source